SHIPSERV
PRODUCTSOMS
63 Cutting Tools
IMPA编号 | 中文 | 英文 | 产地 |
630101 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.3MM | 中国 |
630102 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.4MM |
|
630103 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.5MM |
|
630104 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.6MM |
|
630105 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.7MM |
|
630106 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.8MM |
|
630107 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 0.9MM |
|
630108 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.0MM |
|
630109 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.1MM |
|
630110 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.2MM |
|
630111 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.3MM |
|
630112 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.4MM |
|
630113 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.5MM |
|
630114 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.6MM |
|
630115 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.7MM |
|
630116 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.8MM |
|
630117 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 1.9MM |
|
630118 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.0MM |
|
630119 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.1MM |
|
630120 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.2MM |
|
630121 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.3MM |
|
630122 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.4MM |
|
630123 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.5MM |
|
630124 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.6MM | 中国 |
630125 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.7MM |
|
630126 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.8MM |
|
630127 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 2.9MM |
|
630128 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.0MM | 中国 |
630129 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.1MM | 中国 |
630130 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.2MM |
|
630131 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.3MM | 中国 |
630132 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.4MM |
|
630133 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.5MM |
|
630134 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.6MM |
|
630135 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.7MM | 中国 |
630136 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.8MM |
|
630137 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 3.9MM |
|
630138 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.0MM |
|
630139 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.1MM |
|
630140 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.2MM |
|
630141 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.3MM |
|
630142 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.4MM |
|
630143 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.5MM |
|
630144 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.6MM |
|
630145 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.7MM |
|
630146 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.8MM |
|
630147 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 4.9MM |
|
630148 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.0MM |
|
630149 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.1MM |
|
630150 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.2MM | 中国 |
630151 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.3MM | 中国 |
630152 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.4MM | 中国 |
630153 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.5MM | 中国 |
630154 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.6MM | 中国 |
630155 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.7MM | 中国 |
630156 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.8MM | 中国 |
630157 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 5.9MM | 中国 |
630158 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.0MM | 中国 |
630159 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.1MM | 中国 |
630160 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.2MM | 中国 |
630161 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.3MM |
|
630162 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.4MM | 中国 |
630163 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.5MM | 中国 |
630164 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.6MM | 中国 |
630165 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.7MM | 中国 |
630166 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.8MM | 中国 |
630167 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 6.9MM | 中国 |
630168 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.0MM | 中国 |
630169 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.1MM | 中国 |
630170 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.2MM | 中国 |
630171 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.3MM | 中国 |
630172 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.4MM | 中国 |
630173 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.5MM | 中国 |
630174 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.6MM | 中国 |
630175 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.7MM | 中国 |
630176 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.8MM | 中国 |
630177 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 7.9MM | 中国 |
630178 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.0MM | 中国 |
630179 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.1MM | 中国 |
630180 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.2MM | 中国 |
630181 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.3MM | 中国 |
630182 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.4MM | 中国 |
630183 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.5MM | 中国 |
630184 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.6MM | 中国 |
630185 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.7MM | 中国 |
630186 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.8MM | 中国 |
630187 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 8.9MM | 中国 |
630188 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.0MM | 中国 |
630189 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.1MM | 中国 |
630190 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.2MM | 中国 |
630191 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.3MM | 中国 |
630192 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.4MM | 中国 |
630193 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.5MM | 中国 |
630194 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.6MM | 中国 |
630195 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.7MM | 中国 |
630196 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.8MM | 中国 |
630197 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 9.9MM | 中国 |
630198 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 10.0MM | 中国 |
630199 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 10.5MM | 中国 |
630201 | 直柄麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_TWIST 11.0MM | 中国 |
630251 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_2.0-6.5MM 8S IN POLY CASE | 中国 |
630252 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_1.5-6.5MM 13S IN POLY CASE | 中国 |
630253 | 高速钻头组 | DRILL SET HSS STRAIGHT SHANK_1.5-6.5MM 13S IN STEEL CASE | 中国 |
630254 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_1-10MM 19S IN STEEL CASE | 上海征浪 |
630255 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_1-13MM 25S IN STEEL CASE | 上海征浪 |
630256 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_6-10MM 41S IN STEEL CASE |
|
630257 | 成组钻头 | DRILL SET HSS STRAIGHT SHANK_1-5.9MM 50S IN STEEL CASE |
|
630271 | 钻头架 | DRILL STAND 1.0-6.5MM 56HOLES_ | 中国 |
630272 | 钻头架 | DRILL STAND 0.5-13.0MM_26HOLES |
|
630273 | 钻头架 | DRILL STAND 6.6-13.0MM_65HOLES |
|
630301 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 10.0MM | 中国 |
630302 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 10.5MM | 中国 |
630303 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 11.0MM | 中国 |
630304 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 11.5MM | 中国 |
630305 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 12.0MM | 中国 |
630306 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 12.5MM | 中国 |
630307 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 13.0MM | 中国 |
630308 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 13.5MM | 中国 |
630309 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 14.0MM | 中国 |
630310 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 14.5MM | 中国 |
630311 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 15.0MM | 中国 |
630312 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 15.5MM | 中国 |
630313 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 16.0MM | 中国 |
630314 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 16.5MM | 中国 |
630315 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 17.0MM | 中国 |
630316 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 17.5MM | 中国 |
630317 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 18.0MM | 中国 |
630318 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 18.5MM | 中国 |
630319 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 19.0MM | 中国 |
630320 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 19.5MM | 中国 |
630321 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 20.0MM | 中国 |
630322 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 20.5MM | 中国 |
630323 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 21.0MM | 中国 |
630324 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 21.5MM | 中国 |
630325 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 22.0MM | 中国 |
630326 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 22.5MM | 中国 |
630327 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 23.0MM | 中国 |
630328 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 23.5MM | 中国 |
630329 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 24.0MM | 中国 |
630330 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 24.5MM | 中国 |
630331 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 25.0MM | 中国 |
630332 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 25.5MM | 中国 |
630333 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 26.0MM | 中国 |
630334 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 26.5MM | 中国 |
630335 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 27.0MM | 中国 |
630336 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 27.5MM | 中国 |
630337 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 28.0MM | 中国 |
630338 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 28.5MM | 中国 |
630339 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 29.0MM | 中国 |
630340 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 29.5MM | 中国 |
630341 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 30.0MM | 中国 |
630342 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 30.5MM | 中国 |
630343 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 31.0MM | 中国 |
630344 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 31.5MM | 中国 |
630345 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 32MM | 中国 |
630346 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 33MM | 中国 |
630347 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 34MM | 中国 |
630348 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 35MM | 中国 |
630349 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 36MM | 中国 |
630350 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 37MM | 中国 |
630351 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 38MM | 中国 |
630352 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 39MM | 中国 |
630353 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 40MM | 中国 |
630354 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 41MM | 中国 |
630355 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 42MM | 中国 |
630356 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 43MM | 中国 |
630357 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 44MM | 中国 |
630358 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 45MM | 中国 |
630359 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 46MM | 中国 |
630360 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 47MM | 中国 |
630361 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 48MM | 中国 |
630362 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 49MM | 中国 |
630363 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 50MM | 中国 |
630364 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 51MM |
|
630365 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 52MM |
|
630366 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 53MM | 中国 |
630367 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 54MM |
|
630368 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 55MM |
|
630369 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 56MM |
|
630370 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 57MM |
|
630371 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 58MM |
|
630372 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 59MM |
|
630373 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 60MM |
|
630374 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 61MM |
|
630375 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 62MM |
|
630376 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 63MM |
|
630377 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 64MM |
|
630378 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 65MM |
|
630379 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 66MM |
|
630380 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 67MM |
|
630381 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 68MM |
|
630382 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 69MM |
|
630383 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 70MM |
|
630384 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 71MM |
|
630385 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 72MM |
|
630386 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 73MM |
|
630387 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 74MM |
|
630388 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 75MM |
|
630389 | 莫式锥柄麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_TWIST 76MM |
|
630401 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 1.0X75MM | 中国 |
630402 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 1.5X75MM |
|
630403 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 2.0X100MM |
|
630404 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 2.5X125MM |
|
630405 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 3.0X125MM |
|
630406 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 3.5X150MM |
|
630407 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 4.0X200MM |
|
630408 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 4.5X200MM |
|
630409 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 5.0X200MM |
|
630410 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 5.5X200MM |
|
630411 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 6.0X200MM |
|
630412 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 6.5X200MM |
|
630413 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 7.0X200MM |
|
630414 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 7.5X250MM |
|
630415 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 8.0X250MM |
|
630416 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 8.5X250MM |
|
630417 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 9.0X250MM |
|
630418 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 9.5X250MM |
|
630419 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 10.0X250MM |
|
630420 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 10.5X250MM |
|
630421 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 11.0X250MM |
|
630422 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 11.5X250MM |
|
630423 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 11.5X300MM |
|
630424 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 12.0X250MM |
|
630425 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 12.0X300MM |
|
630426 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 12.5X250MM |
|
630427 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 12.5X300MM |
|
630428 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 13.0X250MM |
|
630429 | 直柄长麻花钻头 | DRILL H.S.S. STRAIGHT SHANK_LONG TWIST 13.0X300MM |
|
630451 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 10.0X250MM | 中国 |
630452 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 11.0X250MM |
|
630453 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 12.0X250MM |
|
630454 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 13.0X300MM |
|
630455 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 14.0X350MM |
|
630456 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 15.0X350MM |
|
630457 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 16.0X350MM |
|
630458 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 17.0X350MM |
|
630459 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 18.0X350MM |
|
630460 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 19.0X350MM |
|
630461 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 20.0X400MM |
|
630462 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 21.0X400MM |
|
630463 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 22.0X400MM |
|
630464 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 23.0X450MM |
|
630465 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 24.0X450MM |
|
630466 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 25.0X450MM |
|
630467 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 26.0X500MM |
|
630468 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 27.0X500MM |
|
630469 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 28.0X500MM |
|
630470 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 29.0X500MM |
|
630471 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 29.0X600MM |
|
630472 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 30.0X500MM |
|
630473 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 30.0X600MM |
|
630474 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 31.0X500MM |
|
630475 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 31.0X600MM |
|
630476 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 32.0X450MM |
|
630477 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 32.0X500MM |
|
630478 | 莫式锥柄长麻花钻头 | DRILL H.S.S. MORSE TAPER SHANK_LONG TWIST 32.0X600MM |
|
630501 | 中心钻头 | DRILL CENTER A-TYPE_1.0MM DRILL DIAM 60DEG | 中国 |
630502 | 中心钻头 | DRILL CENTER A-TYPE_1.6MM DRILL DIAM 60DEG |
|
630503 | 中心钻头 | DRILL CENTER A-TYPE_2.0MM DRILL DIAM 60DEG |
|
630504 | 中心钻头 | DRILL CENTER A-TYPE_2.5MM DRILL DIAM 60DEG |
|
630505 | 中心钻头 | DRILL CENTER A-TYPE_3.15MM DRILL DIAM 60DEG |
|
630506 | 中心钻头 | DRILL CENTER A-TYPE_4.0MM DRILL DIAM 60DEG |
|
630507 | 中心钻头 | DRILL CENTER A-TYPE_6.3MM DRILL DIAM 60DEG |
|
630508 | 中心钻头 | DRILL CENTER A-TYPE_10.0MM DRILL DIAM 60DEG |
|
630511 | 中心钻头 | DRILL CENTER A-TYPE_1.0MM DRILL DIAM 75DEG |
|
630512 | 中心钻头 | DRILL CENTER A-TYPE_1.6MM DRILL DIAM 75DEG |
|
630513 | 中心钻头 | DRILL CENTER A-TYPE_2.0MM DRILL DIAM 75DEG |
|
630514 | 中心钻头 | DRILL CENTER A-TYPE_2.5MM DRILL DIAM 75DEG |
|
630515 | 中心钻头 | DRILL CENTER A-TYPE_3.15MM DRILL DIAM 75DEG |
|
630516 | 中心钻头 | DRILL CENTER A-TYPE_4.0MM DRILL DIAM 75DEG |
|
630517 | 中心钻头 | DRILL CENTER A-TYPE_6.3MM DRILL DIAM 75DEG |
|
630518 | 中心钻头 | DRILL CENTER A-TYPE_10.0MM DRILL DIAM 75DEG |
|
630519 | 中心钻头 | DRILL CENTER A-TYPE_12.5MM DRILL DIAM 75DEG |
|
630521 | 中心钻头 | DRILL CENTER A-TYPE_1.0MM DRILL DIAM 90DEG |
|
630522 | 中心钻头 | DRILL CENTER A-TYPE_2.0MM DRILL DIAM 90DEG |
|
630523 | 中心钻头 | DRILL CENTER A-TYPE_2.5MM DRILL DIAM 90DEG |
|
630524 | 中心钻头 | DRILL CENTER A-TYPE_3.15MM DRILL DIAM 90DEG |
|
630525 | 中心钻头 | DRILL CENTER A-TYPE_4.0MM DRILL DIAM 90DEG |
|
630526 | 中心钻头 | DRILL CENTER A-TYPE_6.3MM DRILL DIAM 90DEG |
|
630527 | 中心钻头 | DRILL CENTER A-TYPE_10.0MM DRILL DIAM 90DEG |
|
630528 | 中心钻头 | DRILL CENTER A-TYPE_12.5MM DRILL DIAM 90DEG |
|
630531 | 中心钻头 | DRILL CENTER B-TYPE_1.0MM DRILL DIAM 60DEG |
|
630532 | 中心钻头 | DRILL CENTER B-TYPE_1.6MM DRILL DIAM 60DEG |
|
630533 | 中心钻头 | DRILL CENTER B-TYPE_2.0MM DRILL DIAM 60DEG |
|
630534 | 中心钻头 | DRILL CENTER B-TYPE_2.5MM DRILL DIAM 60DEG |
|
630535 | 中心钻头 | DRILL CENTER B-TYPE_3.15MM DRILL DIAM 60DEG |
|
630536 | 中心钻头 | DRILL CENTER B-TYPE_4.0MM DRILL DIAM 60DEG |
|
630537 | 中心钻头 | DRILL CENTER B-TYPE_6.3MM DRILL DIAM 60DEG |
|
630538 | 中心钻头 | DRILL CENTER B-TYPE_10.0MM DRILL DIAM 60DEG |
|
630541 | 中心钻头 | DRILL CENTER B-TYPE_1.0MM DRILL DIAM 75DEG |
|
630542 | 中心钻头 | DRILL CENTER B-TYPE_1.6MM DRILL DIAM 75DEG |
|
630543 | 中心钻头 | DRILL CENTER B-TYPE_2.0MM DRILL DIAM 75DEG |
|
630544 | 中心钻头 | DRILL CENTER B-TYPE_2.5MM DRILL DIAM 75DEG |
|
630545 | 中心钻头 | DRILL CENTER B-TYPE_3.15MM DRILL DIAM 75DEG |
|
630546 | 中心钻头 | DRILL CENTER B-TYPE_4.0MM DRILL DIAM 75DEG |
|
630547 | 中心钻头 | DRILL CENTER B-TYPE_6.3MM DRILL DIAM 75DEG |
|
630548 | 中心钻头 | DRILL CENTER B-TYPE_10.0MM DRILL DIAM 75DEG |
|
630549 | 中心钻头 | DRILL CENTER B-TYPE_12.5MM DRILL DIAM 75DEG |
|
630551 | 中心钻头 | DRILL CENTER B-TYPE_1.0MM DRILL DIAM 90DEG |
|
630552 | 中心钻头 | DRILL CENTER B-TYPE_2.0MM DRILL DIAM 90DEG |
|
630553 | 中心钻头 | DRILL CENTER B-TYPE_2.5MM DRILL DIAM 90DEG |
|
630554 | 中心钻头 | DRILL CENTER B-TYPE_3.15MM DRILL DIAM 90DEG |
|
630555 | 中心钻头 | DRILL CENTER B-TYPE_4.0MM DRILL DIAM 90DEG |
|
630556 | 中心钻头 | DRILL CENTER B-TYPE_6.3MM DRILL DIAM 90DEG |
|
630557 | 中心钻头 | DRILL CENTER B-TYPE_10.0MM DRILL DIAM 90DEG |
|
630558 | 中心钻头 | DRILL CENTER B-TYPE_12.5MM DRILL DIAM 90DEG |
|
630561 | 中心钻头 | DRILL CENTER C-TYPE_1.0MM DRILL DIAM 60DEG |
|
630562 | 中心钻头 | DRILL CENTER C-TYPE_1.6MM DRILL DIAM 60DEG |
|
630563 | 中心钻头 | DRILL CENTER C-TYPE_2.0MM DRILL DIAM 60DEG |
|
630564 | 中心钻头 | DRILL CENTER C-TYPE_2.5MM DRILL DIAM 60DEG |
|
630565 | 中心钻头 | DRILL CENTER C-TYPE_3.15MM DRILL DIAM 60DEG |
|
630566 | 中心钻头 | DRILL CENTER C-TYPE_4.0MM DRILL DIAM 60DEG |
|
630567 | 中心钻头 | DRILL CENTER C-TYPE_6.3MM DRILL DIAM 60DEG |
|
630568 | 中心钻头 | DRILL CENTER C-TYPE_10.0MM DRILL DIAM 60DEG |
|
630571 | 中心钻头 | DRILL CENTER C-TYPE_1.0MM DRILL DIAM 75DEG |
|
630572 | 中心钻头 | DRILL CENTER C-TYPE_1.6MM DRILL DIAM 75DEG |
|
630573 | 中心钻头 | DRILL CENTER C-TYPE_2.0MM DRILL DIAM 75DEG |
|
630574 | 中心钻头 | DRILL CENTER C-TYPE_2.5MM DRILL DIAM 75DEG |
|
630575 | 中心钻头 | DRILL CENTER C-TYPE_3.15MM DRILL DIAM 75DEG |
|
630576 | 中心钻头 | DRILL CENTER C-TYPE_4.0MM DRILL DIAM 75DEG |
|
630577 | 中心钻头 | DRILL CENTER C-TYPE_6.3MM DRILL DIAM 75DEG |
|
630578 | 中心钻头 | DRILL CENTER C-TYPE_10.0MM DRILL DIAM 75DEG |
|
630579 | 中心钻头 | DRILL CENTER C-TYPE_12.5MM DRILL DIAM 75DEG |
|
630581 | 中心钻头 | DRILL CENTER C-TYPE_1.0MM DRILL DIAM 90DEG |
|
630582 | 中心钻头 | DRILL CENTER C-TYPE_1.6MM DRILL DIAM 90DEG |
|
630583 | 中心钻头 | DRILL CENTER C-TYPE_2.0MM DRILL DIAM 90DEG |
|
630584 | 中心钻头 | DRILL CENTER C-TYPE_2.5MM DRILL DIAM 90DEG |
|
630585 | 中心钻头 | DRILL CENTER C-TYPE_3.15MM DRILL DIAM 90DEG |
|
630586 | 中心钻头 | DRILL CENTER C-TYPE_4.0MM DRILL DIAM 90DEG |
|
630587 | 中心钻头 | DRILL CENTER C-TYPE_6.3MM DRILL DIAM 90DEG |
|
630588 | 中心钻头 | DRILL CENTER C-TYPE_10.0MM DRILL DIAM 90DEG |
|
630589 | 中心钻头 | DRILL CENTER C-TYPE_12.5MM DRILL DIAM 90DEG |
|
630592 | 中心钻头 | DRILL CENTER R-TYPE_1.6MM DRILL DIAM |
|
630593 | 中心钻头 | DRILL CENTER R-TYPE_2.0MM DRILL DIAM |
|
630594 | 中心钻头 | DRILL CENTER R-TYPE_2.5MM DRILL DIAM |
|
630595 | 中心钻头 | DRILL CENTER R-TYPE_3.15MM DRILL DIAM |
|
630596 | 中心钻头 | DRILL CENTER R-TYPE_4.0MM DRILL DIAM |
|
630597 | 中心钻头 | DRILL CENTER R-TYPE_6.3MM DRILL DIAM |
|
630597 | 中心钻头 | DRILL CENTER C-TYPE_3.15MM DRILL DIAM 90DEG |
|
630598 | 中心钻头 | DRILL CENTER R-TYPE_10.0MM DRILL DIAM |
|
630601 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_0.5X30MM | 中国 |
630602 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_0.8X35MM |
|
630603 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_1.0X40MM |
|
630604 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_1.2X45MM |
|
630605 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_1.5X50MM |
|
630606 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_1.8X55MM |
|
630607 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_2.0X60MM |
|
630608 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_2.2X60MM |
|
630609 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_2.5X65MM |
|
630610 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_2.8X65MM |
|
630611 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_3.0X72MM | 上海征浪 |
630612 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_3.5X75MM |
|
630613 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_4.0X80MM |
|
630614 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_4.5X85MM |
|
630615 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_5.0X90MM |
|
630616 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_5.5X95MM |
|
630617 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_6.0X100MM |
|
630618 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_6.5X100MM |
|
630619 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_7.0X105MM | 上海征浪 |
630620 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_7.5X110MM |
|
630621 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_8.0X115MM |
|
630622 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_8.5X120MM |
|
630623 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_9.0X125MM |
|
630624 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_9.5X125MM |
|
630625 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_10.0X130MM |
|
630626 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_10.5X135MM |
|
630627 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_11.0X140MM |
|
630628 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_11.5X145MM |
|
630629 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_12.0X150MM |
|
630630 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_12.5X155MM |
|
630631 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_13.0X160MM |
|
630632 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_13.5X165MM |
|
630633 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_14.0X165MM |
|
630634 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_14.5X170MM |
|
630635 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_15X175MM |
|
630636 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_16X185MM |
|
630637 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_17X190MM |
|
630638 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_18X200MM | 上海征浪 |
630639 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_19X210MM |
|
630640 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_20X220MM |
|
630641 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_21X230MM |
|
630642 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_22X235MM |
|
630643 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_23X250MM |
|
630644 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_24X255MM |
|
630645 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_25X260MM |
|
630646 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_26X270MM |
|
630647 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_28X290MM |
|
630648 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_30X305MM |
|
630649 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_32X315MM |
|
630650 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_34X315MM |
|
630651 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_36X320MM |
|
630652 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_38X325MM |
|
630653 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_40X330MM |
|
630654 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_42X335MM |
|
630655 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_44X340MM |
|
630656 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_46X345MM |
|
630657 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_48X350MM |
|
630658 | 手用铰刀 | REAMER HAND STRAIGHT FLUTE_50X355MM |
|
630701 | 手用铰刀 | REAMER HAND HELICAL FLUTE_0.5X30MM |
|
630702 | 手用铰刀 | REAMER HAND HELICAL FLUTE_0.8X35MM |
|
630703 | 手用铰刀 | REAMER HAND HELICAL FLUTE_1.0X40MM |
|
630704 | 手用铰刀 | REAMER HAND HELICAL FLUTE_1.2X45MM |
|
630705 | 手用铰刀 | REAMER HAND HELICAL FLUTE_1.5X50MM |
|
630706 | 手用铰刀 | REAMER HAND HELICAL FLUTE_1.8X55MM |
|
630707 | 手用铰刀 | REAMER HAND HELICAL FLUTE_2.0X60MM |
|
630708 | 手用铰刀 | REAMER HAND HELICAL FLUTE_2.2X60MM |
|
630709 | 手用铰刀 | REAMER HAND HELICAL FLUTE_2.5X65MM |
|
630710 | 手用铰刀 | REAMER HAND HELICAL FLUTE_2.8X65MM |
|
630711 | 手用铰刀 | REAMER HAND HELICAL FLUTE_3.0X72MM |
|
630712 | 手用铰刀 | REAMER HAND HELICAL FLUTE_3.5X75MM |
|
630713 | 手用铰刀 | REAMER HAND HELICAL FLUTE_4.0X80MM |
|
630714 | 手用铰刀 | REAMER HAND HELICAL FLUTE_4.5X85MM |
|
630715 | 手用铰刀 | REAMER HAND HELICAL FLUTE_5.0X90MM |
|
630716 | 手用铰刀 | REAMER HAND HELICAL FLUTE_5.5X95MM |
|
630717 | 手用铰刀 | REAMER HAND HELICAL FLUTE_6.0X100MM |
|
630718 | 手用铰刀 | REAMER HAND HELICAL FLUTE_6.5X100MM |
|
630719 | 手用铰刀 | REAMER HAND HELICAL FLUTE_7.0X105MM |
|
630720 | 手用铰刀 | REAMER HAND HELICAL FLUTE_7.5X110MM |
|
630721 | 手用铰刀 | REAMER HAND HELICAL FLUTE_8.0X115MM |
|
630722 | 手用铰刀 | REAMER HAND HELICAL FLUTE_8.5X120MM |
|
630723 | 手用铰刀 | REAMER HAND HELICAL FLUTE_9.0X125MM |
|
630724 | 手用铰刀 | REAMER HAND HELICAL FLUTE_9.5X125MM |
|
630725 | 手用铰刀 | REAMER HAND HELICAL FLUTE_10.0X130MM |
|
630726 | 手用铰刀 | REAMER HAND HELICAL FLUTE_10.5X135MM |
|
630727 | 手用铰刀 | REAMER HAND HELICAL FLUTE_11.0X140MM |
|
630728 | 手用铰刀 | REAMER HAND HELICAL FLUTE_11.5X145MM |
|
630729 | 手用铰刀 | REAMER HAND HELICAL FLUTE_12.0X150MM |
|
630730 | 手用铰刀 | REAMER HAND HELICAL FLUTE_12.5X155MM |
|
630731 | 手用铰刀 | REAMER HAND HELICAL FLUTE_13.0X160MM |
|
630732 | 手用铰刀 | REAMER HAND HELICAL FLUTE_13.5X165MM |
|
630733 | 手用铰刀 | REAMER HAND HELICAL FLUTE_14.0X165MM |
|
630734 | 手用铰刀 | REAMER HAND HELICAL FLUTE_14.5X170MM |
|
630735 | 手用铰刀 | REAMER HAND HELICAL FLUTE_15X175MM |
|
630736 | 手用铰刀 | REAMER HAND HELICAL FLUTE_16X185MM |
|
630737 | 手用铰刀 | REAMER HAND HELICAL FLUTE_17X190MM |
|
630738 | 手用铰刀 | REAMER HAND HELICAL FLUTE_18X200MM |
|
630739 | 手用铰刀 | REAMER HAND HELICAL FLUTE_19X210MM |
|
630740 | 手用铰刀 | REAMER HAND HELICAL FLUTE_20X220MM |
|
630741 | 手用铰刀 | REAMER HAND HELICAL FLUTE_21X230MM |
|
630742 | 手用铰刀 | REAMER HAND HELICAL FLUTE_22X235MM |
|
630801 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 0.6MM | 中国 |
630802 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 0.8MM |
|
630803 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 1.0MM |
|
630804 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 1.2MM |
|
630805 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 1.6MM |
|
630806 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 2.0MM |
|
630807 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 2.5MM |
|
630808 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 3.0MM |
|
630809 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 4MM |
|
630810 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 5MM |
|
630811 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 6MM |
|
630812 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 8MM |
|
630813 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 10MM |
|
630814 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 13MM |
|
630815 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 16MM |
|
630816 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 20MM |
|
630817 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 25MM |
|
630818 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 30MM |
|
630819 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 40MM |
|
630820 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_STRAIGHT FLUTE 50MM |
|
630831 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 0.6MM |
|
630832 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 0.8MM |
|
630833 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 1.0MM |
|
630834 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 1.2MM |
|
630835 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 1.6MM |
|
630836 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 2.0MM |
|
630837 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 2.5MM |
|
630838 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 3.0MM |
|
630839 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 4.0MM |
|
630840 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 5.0MM |
|
630841 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 6.0MM |
|
630842 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 8.0MM |
|
630843 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 10.0MM |
|
630844 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 13.0MM |
|
630845 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 16.0MM |
|
630846 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 20.0MM |
|
630847 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 25.0MM |
|
630848 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 30.0MM |
|
630849 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 40.0MM |
|
630850 | 锥柄铰刀 | REAMER HAND 1/50 TAPER PIN_HELICAL FLUTE 50.0MM |
|
630861 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #0000 | 中国 |
630862 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #000 |
|
630863 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #00 |
|
630864 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #0 |
|
630865 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #1 |
|
630866 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #2 |
|
630867 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #3 |
|
630868 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #4 |
|
630869 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #5 |
|
630870 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #6 |
|
630871 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #7 |
|
630872 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #8 |
|
630873 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #9 |
|
630874 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #10 |
|
630875 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #11 |
|
630876 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD TRAIGHT FLUTE #12 |
|
630877 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #13 |
|
630878 | 美国标准锥栓铰刀 | REAMER TAPER PIN AMERICAN_STANDARD STRAIGHT FLUTE #14 |
|
630901 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#0 | 中国 |
630902 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#1 |
|
630903 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#2 |
|
630904 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#3 |
|
630905 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#4 |
|
630906 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#5 |
|
630907 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#6 |
|
630908 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_FINISHING MT#7 |
|
630911 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#0 |
|
630912 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#1 |
|
630913 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#2 |
|
630914 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#3 |
|
630915 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#4 |
|
630916 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#5 |
|
630917 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#6 |
|
630918 | 莫式锥柄直槽铰刀 | REAMER MORSE TAPER STRAIGHT_ROUGH CUTTING MT#7 |
|
630951 | 可调铰刀全套 | REAMER SET ADJUSTABLE_4.5-6.35MM 5S | 中国 |
630952 | 可调铰刀全套 | REAMER SET ADJUSTABLE_6.35-9.5MM 4S |
|
630953 | 可调铰刀全套 | REAMER SET ADJUSTABLE_9.5-12MM 3S |
|
630954 | 可调铰刀全套 | REAMER SET ADJUSTABLE_12-27MM 8S |
|
630955 | 可调铰刀全套 | REAMER SET ADJUSTABLE_12-38MM 11S |
|
630956 | 可调铰刀全套 | REAMER SET ADJUSTABLE_15-27MM 6S |
|
630957 | 可调铰刀全套 | REAMER SET ADJUSTABLE_15-38MM 9S |
|
630958 | 可调铰刀全套 | REAMER SET ADJUSTABLE_9.5-56MM 16S |
|
631001 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.0XP0.25MM 3‘S CARBON STEEL | 中国 |
631002 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.1XP0.25MM 3‘S CARBON STEEL |
|
631003 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.2XP0.25MM 3‘S CARBON STEEL |
|
631004 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.4XP0.30MM 3‘S CARBON STEEL |
|
631005 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.6XP0.35MM 3‘S CARBON STEEL |
|
631006 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.7XP0.35MM 3‘S CARBON STEEL |
|
631007 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M1.8XP0.35MM 3‘S CARBON STEEL |
|
631008 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M2.0XP0.40MM 3‘S CARBON STEEL | 上海征浪 |
631009 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M2.2XP0.45MM 3‘S CARBON STEEL |
|
631010 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M2.3XP0.40MM 3‘S CARBON STEEL |
|
631011 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M2.5XP0.45MM 3‘S CARBON STEEL |
|
631012 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M2.6XP0.45MM 3‘S CARBON STEEL |
|
631013 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M3.0XP0.50MM 3‘S CARBON STEEL |
|
631014 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M3.5XP0.60MM 3‘S CARBON STEEL |
|
631015 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M4.0XP0.70MM 3‘S CARBON STEEL |
|
631016 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M4.5XP0.75MM 3‘S CARBON STEEL |
|
631017 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M5.0XP0.80MM 3‘S CARBON STEEL |
|
631018 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M6.0XP1.00MM 3‘S CARBON STEEL |
|
631019 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M7.0XP1.00MM 3‘S CARBON STEEL |
|
631020 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M8.0XP1.25MM 3‘S CARBON STEEL |
|
631021 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M9.0XP1.25MM 3‘S CARBON STEEL |
|
631022 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M10XP1.50MM 3‘S CARBON STEEL | 上海征浪 |
631023 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M11XP1.50MM 3‘S CARBON STEEL |
|
631024 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M12XP1.75MM 3‘S CARBON STEEL |
|
631025 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M14XP2.00MM 3‘S CARBON STEEL |
|
631026 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M16XP2.00MM 3‘S CARBON STEEL |
|
631027 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M18XP2.50MM 3‘S CARBON STEEL |
|
631028 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M20XP2.50MM 3‘S CARBON STEEL | 上海征浪 |
631029 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M22XP2.50MM 3‘S CARBON STEEL |
|
631030 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M24XP3.00MM 3‘S CARBON STEEL |
|
631031 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M27XP3.00MM 3‘S CARBON STEEL |
|
631032 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M30XP3.50MM 3‘S CARBON STEEL |
|
631033 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M33XP3.50MM 3‘S CARBON STEEL |
|
631034 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M36XP4.00MM 3‘S CARBON STEEL |
|
631035 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M39XP4.00MM 3‘S CARBON STEEL |
|
631036 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M42XP4.50MM 3‘S CARBON STEEL |
|
631037 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M45XP4.50MM 3‘S CARBON STEEL |
|
631038 | 米制粗牙丝攻 | TAP HAND METRIC COARSE_M48XP5.00MM 3‘S CARBON STEEL |
|
631051 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.0_P0.25MM 3‘S HIGH SPEED STEEL |
|
631052 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.1_P0.25MM 3‘S HIGH SPEED STEEL |
|
631053 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.2_P0.25MM 3‘S HIGH SPEED STEEL |
|
631054 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.4_P0.30MM 3‘S HIGH SPEED STEEL |
|
631055 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.6_P0.35MM 3‘S HIGH SPEED STEEL |
|
631056 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.7_P0.35MM 3‘S HIGH SPEED STEEL |
|
631057 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M1.8_P0.35MM 3‘S HIGH SPEED STEEL |
|
631058 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M2.0_P0.40MM 3‘S HIGH SPEED STEEL |
|
631059 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M2.2_P0.45MM 3‘S HIGH SPEED STEEL |
|
631060 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M2.3_P0.40MM 3‘S HIGH SPEED STEEL |
|
631061 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M2.5_P0.45MM 3‘S HIGH SPEED STEEL |
|
631062 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M2.6_P0.45MM 3‘S HIGH SPEED STEEL |
|
631063 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M3.0_P0.50MM 3‘S HIGH SPEED STEEL |
|
631064 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M3.5_P0.60MM 3‘S HIGH SPEED STEEL |
|
631065 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M4.0_P0.70MM 3‘S HIGH SPEED STEEL |
|
631066 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M4.5_P0.75MM 3‘S HIGH SPEED STEEL |
|
631067 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M5.0_P0.80MM 3‘S HIGH SPEED STEEL |
|
631068 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M6.0_P1.00MM 3‘S HIGH SPEED STEEL | 上海征浪 |
631069 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M7.0_P1.00MM 3‘S HIGH SPEED STEEL |
|
631070 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M8.0_P1.25MM 3‘S HIGH SPEED STEEL | 上海征浪 |
631071 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M9.0_P1.25MM 3‘S HIGH SPEED STEEL |
|
631072 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M10_P1.50MM 3‘S HIGH SPEED STEEL |
|
631073 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M11_P1.50MM 3‘S HIGH SPEED STEEL |
|
631074 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M12_P1.75MM 3‘S HIGH SPEED STEEL |
|
631075 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M14_P2.00MM 3‘S HIGH SPEED STEEL |
|
631076 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M16_P2.00MM 3‘S HIGH SPEED STEEL |
|
631077 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M18_P2.50MM 3‘S HIGH SPEED STEEL |
|
631078 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M20_P2.50MM 3‘S HIGH SPEED STEEL |
|
631079 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M22_P2.50MM 3‘S HIGH SPEED STEEL |
|
631080 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M24_P3.00MM 3‘S HIGH SPEED STEEL |
|
631081 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M27_P3.00MM 3‘S HIGH SPEED STEEL |
|
631082 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M30_P3.50MM 3‘S HIGH SPEED STEEL |
|
631083 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M33_P3.50MM 3‘S HIGH SPEED STEEL |
|
631084 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M36_P4.00MM 3‘S HIGH SPEED STEEL |
|
631085 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M39_P4.00MM 3‘S HIGH SPEED STEEL |
|
631086 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M42_P4.50MM 3‘S HIGH SPEED STEEL |
|
631087 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M45_P4.50MM 3‘S HIGH SPEED STEEL |
|
631088 | 米制粗牙丝攻 | TAP HAND METRIC COARSE M48_P5.00MM 3‘S HIGH SPEED STEEL |
|
631101 | 米制细牙丝攻 | TAP HAND METRIC FINE_M1.0X0.2MM 3‘S CARBON STEEL | 中国 |
631102 | 米制细牙丝攻 | TAP HAND METRIC FINE_M1.1X0.2MM 3‘S CARBON STEEL |
|
631103 | 米制细牙丝攻 | TAP HAND METRIC FINE_M1.2X0.2MM 3‘S CARBON STEEL |
|
631104 | 米制细牙丝攻 | TAP HAND METRIC FINE_M1.4X0.2MM 3‘S CARBON STEEL |
|
631105 | 米制细牙丝攻 | TAP HAND METRIC FINE_M1.6X0.2MM 3‘S CARBON STEEL |
|
631107 | 米制细牙丝攻 | TAP HAND METRIC FINE_M2.0X0.25MM 3‘S CARBON STEEL |
|
631108 | 米制细牙丝攻 | TAP HAND METRIC FINE_M2.2X0.25MM 3‘S CARBON STEEL |
|
631109 | 米制细牙丝攻 | TAP HAND METRIC FINE_M2.5X0.35MM 3‘S CARBON STEEL |
|
631110 | 米制细牙丝攻 | TAP HAND METRIC FINE_M3.0X0.35MM 3‘S CARBON STEEL |
|
631111 | 米制细牙丝攻 | TAP HAND METRIC FINE_M3.5X0.5MM 3‘S CARBON STEEL |
|
631112 | 米制细牙丝攻 | TAP HAND METRIC FINE_M4.0X0.5MM 3‘S CARBON STEEL |
|
631113 | 米制细牙丝攻 | TAP HAND METRIC FINE_M4.5X0.5MM 3‘S CARBON STEEL |
|
631114 | 米制细牙丝攻 | TAP HAND METRIC FINE_M5.0X0.5MM 3‘S CARBON STEEL |
|
631115 | 米制细牙丝攻 | TAP HAND METRIC FINE_M5.5X0.5MM 3‘S CARBON STEEL |
|
631116 | 米制细牙丝攻 | TAP HAND METRIC FINE_M6.0X0.75MM 3‘S CARBON STEEL |
|
631117 | 米制细牙丝攻 | TAP HAND METRIC FINE_M7.0X0.75MM 3‘S CARBON STEEL |
|
631118 | 米制细牙丝攻 | TAP HAND METRIC FINE_M8.0X1MM 3‘S CARBON STEEL |
|
631119 | 米制细牙丝攻 | TAP HAND METRIC FINE_M8.0X0.75MM 3‘S CARBON STEEL |
|
631120 | 米制细牙丝攻 | TAP HAND METRIC FINE_M9.0X1MM 3‘S CARBON STEEL |
|
631121 | 米制细牙丝攻 | TAP HAND METRIC FINE_M9.0X0.75MM 3‘S CARBON STEEL |
|
631122 | 米制细牙丝攻 | TAP HAND METRIC FINE_M10X1.25MM 3‘S CARBON STEEL |
|
631123 | 米制细牙丝攻 | TAP HAND METRIC FINE_M10X1MM 3‘S CARBON STEEL |
|
631124 | 米制细牙丝攻 | TAP HAND METRIC FINE_M10X0.75MM 3‘S CARBON STEEL |
|
631125 | 米制细牙丝攻 | TAP HAND METRIC FINE_M11X1MM 3‘S CARBON STEEL |
|
631126 | 米制细牙丝攻 | TAP HAND METRIC FINE_M11X0.75MM 3‘S CARBON STEEL |
|
631127 | 米制细牙丝攻 | TAP HAND METRIC FINE_M12X1.5MM 3‘S CARBON STEEL |
|
631128 | 米制细牙丝攻 | TAP HAND METRIC FINE_M12X1.25MM 3‘S CARBON STEEL |
|
631129 | 米制细牙丝攻 | TAP HAND METRIC FINE_M12X1MM 3‘S CARBON STEEL |
|
631130 | 米制细牙丝攻 | TAP HAND METRIC FINE_M14X1.5MM 3‘S CARBON STEEL |
|
631131 | 米制细牙丝攻 | TAP HAND METRIC FINE_M14X1MM 3‘S CARBON STEEL |
|
631132 | 米制细牙丝攻 | TAP HAND METRIC FINE_M15X1.5MM 3‘S CARBON STEEL |
|
631133 | 米制细牙丝攻 | TAP HAND METRIC FINE_M15X1MM 3‘S CARBON STEEL |
|
631134 | 米制细牙丝攻 | TAP HAND METRIC FINE_M16X1.5MM 3‘S CARBON STEEL |
|
631135 | 米制细牙丝攻 | TAP HAND METRIC FINE_M16X1MM 3‘S CARBON STEEL |
|
631136 | 米制细牙丝攻 | TAP HAND METRIC FINE_M17X1.5MM 3‘S CARBON STEEL |
|
631137 | 米制细牙丝攻 | TAP HAND METRIC FINE_M17X1MM 3‘S CARBON STEEL |
|
631138 | 米制细牙丝攻 | TAP HAND METRIC FINE_M18X2MM 3‘S CARBON STEEL |
|
631139 | 米制细牙丝攻 | TAP HAND METRIC FINE_M18X1.5MM 3‘S CARBON STEEL |
|
631140 | 米制细牙丝攻 | TAP HAND METRIC FINE_M18X1MM 3‘S CARBON STEEL |
|
631141 | 米制细牙丝攻 | TAP HAND METRIC FINE_M20X2MM 3‘S CARBON STEEL |
|
631142 | 米制细牙丝攻 | TAP HAND METRIC FINE_M20X1.5MM 3‘S CARBON STEEL |
|
631143 | 米制细牙丝攻 | TAP HAND METRIC FINE_M20X1MM 3‘S CARBON STEEL |
|
631144 | 米制细牙丝攻 | TAP HAND METRIC FINE_M22X2MM 3‘S CARBON STEEL |
|
631145 | 米制细牙丝攻 | TAP HAND METRIC FINE_M22X1.5MM 3‘S CARBON STEEL |
|
631146 | 米制细牙丝攻 | 631146 |
|
631147 | 米制细牙丝攻 | TAP HAND METRIC FINE_M24X2MM 3‘S CARBON STEEL |
|
631148 | 米制细牙丝攻 | TAP HAND METRIC FINE_M24X1.5MM 3‘S CARBON STEEL |
|
631149 | 米制细牙丝攻 | TAP HAND METRIC FINE_M24X1MM 3‘S CARBON STEEL |
|
631150 | 米制细牙丝攻 | TAP HAND METRIC FINE_M25X2MM 3‘S CARBON STEEL |
|
631151 | 米制细牙丝攻 | TAP HAND METRIC FINE_M25X1.5MM 3‘S CARBON STEEL |
|
631152 | 米制细牙丝攻 | TAP HAND METRIC FINE_M25X1MM 3‘S CARBON STEEL |
|
631153 | 米制细牙丝攻 | TAP HAND METRIC FINE_M26X1.5MM 3‘S CARBON STEEL |
|
631154 | 米制细牙丝攻 | TAP HAND METRIC FINE_M27X2MM 3‘S CARBON STEEL |
|
631155 | 米制细牙丝攻 | TAP HAND METRIC FINE_M27X1.5MM 3‘S CARBON STEEL |
|
631156 | 米制细牙丝攻 | TAP HAND METRIC FINE_M27X1MM 3‘S CARBON STEEL |
|
631157 | 米制细牙丝攻 | TAP HAND METRIC FINE_M28X2MM 3‘S CARBON STEEL |
|
631158 | 米制细牙丝攻 | TAP HAND METRIC FINE_M28X1.5MM 3‘S CARBON STEEL |
|
631159 | 米制细牙丝攻 | TAP HAND METRIC FINE_M28X1MM 3‘S CARBON STEEL |
|
631160 | 米制细牙丝攻 | TAP HAND METRIC FINE_M30X3MM 3‘S CARBON STEEL |
|
631161 | 米制细牙丝攻 | TAP HAND METRIC FINE_M30X2MM 3‘S CARBON STEEL |
|
631162 | 米制细牙丝攻 | TAP HAND METRIC FINE_M30X1.5MM 3‘S CARBON STEEL |
|
631163 | 米制细牙丝攻 | TAP HAND METRIC FINE_M30X1MM 3‘S CARBON STEEL |
|
631164 | 米制细牙丝攻 | TAP HAND METRIC FINE_M32X2MM 3‘S CARBON STEEL |
|
631165 | 米制细牙丝攻 | TAP HAND METRIC FINE_M32X1.5MM 3‘S CARBON STEEL |
|
631166 | 米制细牙丝攻 | TAP HAND METRIC FINE_M33X3MM 3‘S CARBON STEEL |
|
631167 | 米制细牙丝攻 | TAP HAND METRIC FINE_M33X2MM 3‘S CARBON STEEL |
|
631168 | 米制细牙丝攻 | TAP HAND METRIC FINE_M33X1.5MM 3‘S CARBON STEEL |
|
631169 | 米制细牙丝攻 | TAP HAND METRIC FINE_M35X1.5MM 3‘S CARBON STEEL |
|
631170 | 米制细牙丝攻 | TAP HAND METRIC FINE_M36X3MM 3‘S CARBON STEEL |
|
631171 | 米制细牙丝攻 | TAP HAND METRIC FINE_M36X2MM 3‘S CARBON STEEL |
|
631172 | 米制细牙丝攻 | TAP HAND METRIC FINE_M36X1.5MM 3‘S CARBON STEEL |
|
631173 | 米制细牙丝攻 | TAP HAND METRIC FINE_M38X1.5MM 3‘S CARBON STEEL |
|
631174 | 米制细牙丝攻 | TAP HAND METRIC FINE_M39X3MM 3‘S CARBON STEEL |
|
631175 | 米制细牙丝攻 | TAP HAND METRIC FINE_M39X2MM 3‘S CARBON STEEL |
|
631176 | 米制细牙丝攻 | TAP HAND METRIC FINE_M39X1.5MM 3‘S CARBON STEEL |
|
631177 | 米制细牙丝攻 | TAP HAND METRIC FINE_M40X3MM 3‘S CARBON STEEL |
|
631178 | 米制细牙丝攻 | TAP HAND METRIC FINE_M40X2MM 3‘S CARBON STEEL |
|
631179 | 米制细牙丝攻 | TAP HAND METRIC FINE_M40X1.5MM 3‘S CARBON STEEL |
|
631180 | 米制细牙丝攻 | TAP HAND METRIC FINE_M42X4MM 3‘S CARBON STEEL |
|
631181 | 米制细牙丝攻 | TAP HAND METRIC FINE_M42X3MM 3‘S CARBON STEEL |
|
631182 | 米制细牙丝攻 | TAP HAND METRIC FINE_M42X2MM 3‘S CARBON STEEL |
|
631183 | 米制细牙丝攻 | TAP HAND METRIC FINE_M42X1.5MM 3‘S CARBON STEEL |
|
631184 | 米制细牙丝攻 | TAP HAND METRIC FINE_M45X4MM 3‘S CARBON STEEL |
|
631185 | 米制细牙丝攻 | TAP HAND METRIC FINE_M45X3MM 3‘S CARBON STEEL |
|
631186 | 米制细牙丝攻 | TAP HAND METRIC FINE_M45X2MM 3‘S CARBON STEEL |
|
631187 | 米制细牙丝攻 | TAP HAND METRIC FINE_M45X1.5MM 3‘S CARBON STEEL |
|
631188 | 米制细牙丝攻 | TAP HAND METRIC FINE_M48X4MM 3‘S CARBON STEEL |
|
631189 | 米制细牙丝攻 | TAP HAND METRIC FINE_M48X3MM 3‘S CARBON STEEL |
|
631190 | 米制细牙丝攻 | TAP HAND METRIC FINE_M48X2MM 3‘S CARBON STEEL |
|
631191 | 米制细牙丝攻 | TAP HAND METRIC FINE_M48X1.5MM 3‘S CARBON STEEL |
|
631192 | 米制细牙丝攻 | TAP HAND METRIC FINE_M50X3MM 3‘S CARBON STEEL |
|
631193 | 米制细牙丝攻 | TAP HAND METRIC FINE_M50X2MM 3‘S CARBON STEEL |
|
631194 | 米制细牙丝攻 | TAP HAND METRIC FINE_M50X1.5MM 3‘S CARBON STEEL |
|
631201 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.0_P0.2MM 3‘S HIGH SPEED STEEL |
|
631202 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.1_P0.2MM 3‘S HIGH SPEED STEEL |
|
631203 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.2_P0.2MM 3‘S HIGH SPEED STEEL |
|
631204 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.4_P0.2MM 3‘S HIGH SPEED STEEL |
|
631205 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.6_P0.2MM 3‘S HIGH SPEED STEEL |
|
631206 | 米制细牙丝攻 | TAP HAND METRIC FINE M1.8_P0.2MM 3‘S HIGH SPEED STEEL |
|
631207 | 米制细牙丝攻 | TAP HAND METRIC FINE M2.0_P0.25MM 3‘S HIGH SPEED STEEL |
|
631259 | 米制细牙丝攻 | TAP HAND METRIC FINE M28_P1MM 3‘S HIGH SPEED STEEL |
|
631301 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/16"X60T 3‘S CARBON STEEL | 中国 |
631302 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/32X48T 3‘S CARBON STEEL |
|
631303 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/8X40T 3‘S CARBON STEEL |
|
631304 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/32X32T 3‘S CARBON STEEL |
|
631305 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/16X24T 3‘S CARBON STEEL |
|
631306 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/32X24T 3‘S CARBON STEEL |
|
631307 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/4X20T 3‘S CARBON STEEL |
|
631308 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/16X18T 3‘S CARBON STEEL |
|
631309 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/8X16T 3‘S CARBON STEEL |
|
631310 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/16X14T 3‘S CARBON STEEL |
|
631311 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/2X12T 3‘S CARBON STEEL |
|
631312 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_9/16X12T 3‘S CARBON STEEL |
|
631313 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/8X11T 3‘S CARBON STEEL |
|
631314 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/4X10T 3‘S CARBON STEEL |
|
631315 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/8X9T 3‘S CARBON STEEL |
|
631316 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1X8T 3‘S CARBON STEEL |
|
631317 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/8X7T 3‘S CARBON STEEL |
|
631318 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/4X7T 3‘S CARBON STEEL |
|
631319 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-3/8X6T 3‘S CARBON STEEL |
|
631320 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/2X6T 3‘S CARBON STEEL |
|
631321 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-5/8X5T 3‘S CARBON STEEL |
|
631322 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-3/4X5T 3‘S CARBON STEEL |
|
631323 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-7/8X4.5T 3‘S CARBON STEEL |
|
631324 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_2X4.5T 3‘S CARBON STEEL |
|
631326 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/16X60T 3‘S HIGH SPEED STEEL |
|
631327 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/32X48T 3‘S HIGH SPEED STEEL |
|
631328 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/8X40T 3‘S HIGH SPEED STEEL |
|
631329 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/32X32T 3‘S HIGH SPEED STEEL |
|
631330 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/16X24T 3‘S HIGH SPEED STEEL |
|
631331 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/32X24T 3‘S HIGH SPEED STEEL |
|
631332 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/4X20T 3‘S HIGH SPEED STEEL |
|
631333 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/16X18T 3‘S HIGH SPEED STEEL |
|
631334 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/8X16T 3‘S HIGH SPEED STEEL |
|
631335 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/16X14T 3‘S HIGH SPEED STEEL |
|
631336 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1/2X12T 3‘S HIGH SPEED STEEL |
|
631337 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_9/16X12T 3‘S HIGH SPEED STEEL |
|
631338 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_5/8X11T 3‘S HIGH SPEED STEEL |
|
631339 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_3/4X10T 3‘S HIGH SPEED STEEL |
|
631340 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_7/8X9T 3‘S HIGH SPEED STEEL |
|
631341 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1X8T 3‘S HIGH SPEED STEEL |
|
631342 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/8X7T 3‘S HIGH SPEED STEEL |
|
631343 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/4X7T 3‘S HIGH SPEED STEEL |
|
631344 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-3/8X6T 3‘S HIGH SPEED STEEL |
|
631345 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-1/2X6T 3‘S HIGH SPEED STEEL |
|
631346 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-5/8X5T 3‘S HIGH SPEED STEEL |
|
631347 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-3/4X5T 3‘S HIGH SPEED STEEL |
|
631348 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_1-7/8X4.5T 3‘S HIGH SPEED ST. |
|
631349 | 惠式英制粗牙丝攻 | TAP HAND WHITWORTH COARSE_2X4.5T 3‘S HIGH SPEED STEEL |
|
631350 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#1-64UNC 3‘S CARBON STEEL | 中国 |
631351 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#2-56UNC 3‘S CARBON STEEL |
|
631352 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#3-48UNC 3‘S CARBON STEEL |
|
631353 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#4-40UNC 3‘S CARBON STEEL |
|
631354 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#5-40UNC 3‘S CARBON STEEL |
|
631355 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#6-32UNC 3‘S CARBON STEEL |
|
631356 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#8-32UNC 3‘S CARBON STEEL |
|
631357 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#10-24UNC 3‘S CARBON STEEL |
|
631358 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#12-24UNC 3‘S CARBON STEEL |
|
631359 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1/4-20UNC 3‘S CARBON STEEL |
|
631360 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_5/16-18UNC 3‘S CARBON STEEL |
|
631361 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_3/8-16UNC 3‘S CARBON STEEL |
|
631362 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_7/16-14UNC 3‘S CARBON STEEL |
|
631363 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1/2-13UNC 3‘S CARBON STEEL |
|
631364 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_9/16-12UNC 3‘S CARBON STEEL |
|
631365 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_5/8-11UNC 3‘S CARBON STEEL |
|
631366 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_3/4-10UNC 3‘S CARBON STEEL |
|
631367 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_7/8-9UNC 3‘S CARBON STEEL |
|
631368 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-8UNC 3‘S CARBON STEEL |
|
631369 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/8-7UNC 3‘S CARBON STEEL |
|
631370 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/4-7UNC 3‘S CARBON STEEL |
|
631371 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-3/8-6UNC 3‘S CARBON STEEL |
|
631372 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/2-6UNC 3‘S CARBON STEEL |
|
631373 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-3/4-5UNC 3‘S CARBON STEEL |
|
631374 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_2-4.5UNC 3‘S CARBON STEEL |
|
631375 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#1-64UNC 3‘S HIGH SPEED STEEL |
|
631376 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#2-56UNC 3‘S HIGH SPEED STEEL |
|
631377 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#3-48UNC 3‘S HIGH SPEED STEEL |
|
631378 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#4-40UNC 3‘S HIGH SPEED STEEL |
|
631379 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#5-40UNC 3‘S HIGH SPEED STEEL |
|
631380 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#6-32UNC 3‘S HIGH SPEED STEEL |
|
631381 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#8-32UNC 3‘S HIGH SPEED STEEL |
|
631382 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#10-24UNC 3‘S HIGH SPEED STEEL |
|
631383 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_#12-24UNC 3‘S HIGH SPEED STEEL |
|
631384 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1/4-20UNC 3‘S HIGH SPEED STEEL |
|
631385 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_5/16-18UNC 3‘S H.S. STEEL |
|
631386 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_3/8-16UNC 3‘S HIGH SPEED STEEL |
|
631387 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_7/16-14UNC 3‘S H.S. STEEL |
|
631388 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1/2-13UNC 3‘S HIGH SPEED STEEL |
|
631389 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_9/16-12UNC 3‘S H.S. SEEL |
|
631390 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_5/8-11UNC 3‘S HIGH SPEED STEEL |
|
631391 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_3/4-10UNC 3‘S HIGH SPEED STEEL |
|
631392 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_7/8-9UNC 3‘S HIGH SPEED STEEL |
|
631393 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-8UNC 3‘S HIGH SPEED STEEL |
|
631394 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/8-7UNC 3‘S H.S. STEEL |
|
631395 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/4-7UNC 3‘S H.S. STEEL |
|
631396 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-3/8-6UNC 3‘S H.S. STEEL |
|
631397 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-1/2-6UNC 3‘S H.S. STEEL |
|
631398 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_1-3/4-5UNC 3‘S H.S. STEEL |
|
631399 | 统一标准粗牙丝攻 | TAP HAND UNIFIED COARSE_2-4.5UNC 3‘S HIGH SPEED STEEL |
|
631401 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/16X28T CARBON STEEL | 中国 |
631402 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/8X28T CARBON STEEL |
|
631403 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/4X19T CARBON STEEL |
|
631404 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3/8X19T CARBON STEEL |
|
631405 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/2X14T CARBON STEEL |
|
631406 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G5/8X14T CARBON STEEL |
|
631407 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3/4X14T CARBON STEEL |
|
631408 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G7/8X14T CARBON STEEL |
|
631409 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1X11T CARBON STEEL |
|
631410 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/8X11T CARBON STEEL |
|
631411 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/4X11T CARBON STEEL |
|
631412 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/2X11T CARBON STEEL |
|
631413 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-3/4X11T CARBON STEEL |
|
631414 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2X11T CARBON STEEL |
|
631415 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-1/4X11T CARBON STEEL |
|
631416 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-1/2X11T CARBON STEEL |
|
631417 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-3/4X11T CARBON STEEL |
|
631418 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3X11T CARBON STEEL |
|
631419 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3-1/2X11T CARBON STEEL |
|
631420 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G4X11T CARBON STEEL |
|
631426 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/8X28T CARBON STEEL |
|
631427 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/4X19T CARBON STEEL |
|
631428 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF3/8X19T CARBON STEEL |
|
631429 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/2X14T CARBON STEEL |
|
631430 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF5/8X14T CARBON STEEL |
|
631431 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF3/4X14T CARBON STEEL |
|
631432 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF7/8X14T CARBON STEEL |
|
631433 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1X11T CARBON STEEL |
|
631434 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/8X11T C.STEEL |
|
631435 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/4X11T C.STEEL |
|
631436 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/2X11T C.STEEL |
|
631437 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-3/4X11T C.STEEL |
|
631438 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF2X11T CARBON STEEL |
|
631451 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/16X28T HSS |
|
631452 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/8X28T HSS |
|
631453 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/4X19T HSS |
|
631454 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3/8X19T HSS |
|
631455 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1/2X14T HSS |
|
631456 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G5/8X14T HSS |
|
631457 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3/4X14T HSS |
|
631458 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G7/8X14T HSS |
|
631459 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1X11T HIGH SPEED STEEL |
|
631460 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/8X11T HSS |
|
631461 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/4X11T HSS |
|
631462 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-1/2X11T HSS |
|
631463 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G1-3/4X11T HSS |
|
631464 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2X11T HIGH SPEED STEEL |
|
631465 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-1/4X11T HSS |
|
631466 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-1/2X11T HSS |
|
631467 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G2-3/4X11T HSS |
|
631468 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3X11T HIGH SPEED STEEL |
|
631469 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G3-1/2X11T HSS |
|
631470 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD G4X11T HIGH SPEED STEEL |
|
631476 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/8X28T HSS |
|
631477 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/4X19T HSS |
|
631478 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF3/8X19T HSS |
|
631479 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1/2X14T HSS |
|
631480 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF5/8X14T HSS |
|
631481 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF3/4X14T HSS |
|
631482 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF7/8X14T HSS |
|
631483 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1X11T HSS |
|
631484 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/8X11T HSS |
|
631485 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/4X11T HSS |
|
631486 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-1/2X11T HSS |
|
631487 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF1-3/4X11T HSS |
|
631488 | 直管用丝攻 | TAP STRAIGHT FOR STRAIGHT PIPE_THREAD PF2X11T HSS |
|
631501 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1/16X28T CARBON STEEL | 中国 |
631502 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1/8X28T CARBON STEEL |
|
631503 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1/4X19T CARBON STEEL |
|
631504 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC3/8X19T CARBON STEEL |
|
631505 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1/2X14T CARBON STEEL |
|
631506 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC3/4X14T CARBON STEEL |
|
631507 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1X11T CARBON STEEL |
|
631508 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1-1/4X11T CARBON STEEL |
|
631509 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC1-1/2X11T CARBON STEEL |
|
631510 | 锥形管用丝攻 | TAP TAPER F0R TAPER THREAD_RC2X11T CARBON STEEL |
|
631511 | 锥形管用丝攻 | TAP TAPER FOR TAPER THREAD_RC2-1/2X11T CARBON STEEL |
|
631512 | 锥形管用丝攻 | TAP TAPER FOR TAPER THREAD_RC3X11T CARBON STEEL |
|
631513 | 锥形管用丝攻 | TAP TAPER FOR TAPER THREAD_RC3-1/2X11T CARBON STEEL |
|
631514 | 锥形管用丝攻 | TAP TAPER FOR TAPER THREAD_RC4X11T CARBON STEEL |
|
631516 | 锥形管用丝攻 | TAP TAPER FOR TAPER THREAD_PT1/8X28T CARBON STEEL |